Windows Installation

From ENIGMA

(Difference between revisions)
Jump to: navigation, search
m (should be a space between 32 or 64 and bit)
m (punctuation and capitalization)
Line 24: Line 24:
=== Configure an IDE ===
=== Configure an IDE ===
-
* Finally, you will want [[LateralGM]] for editing games which you can use by installing Java and then download LateralGM by running <code>./install.sh</code>
+
* Finally, you will want [[LateralGM]] for editing games which you can obtain by running <code>./install.sh</code> from your MSYS2 terminal.
-
 
+
* You will need to install a Java version to use LateralGM that is the same architecture as the packages you installed for ENIGMA (x64/64 bit or x86/32 bit);
-
* You will need to install java for the platform you would like to compile on (x64/64 bit or x86/32 bit);
+
:- Once Java is installed you would most likely want to set up your PATH variable in msys2 (this is one of several ways to fix java command not found)
-
:- Once java is installed you would most likely want to set up your PATH variable in msys2 (this is one of several ways to fix java command not found)
+
:- Edit the file <code>C:\msys64\etc\profile</code> and add the following <syntaxhighlight lang="bash">if [[ $MSYSTEM = "MINGW32" ]] && [[ $(arch) = "x86_64" ]]; then
:- Edit the file <code>C:\msys64\etc\profile</code> and add the following <syntaxhighlight lang="bash">if [[ $MSYSTEM = "MINGW32" ]] && [[ $(arch) = "x86_64" ]]; then
   export PATH=/c/Program\ Files\ \(x86\)/Java/jre1.8.0_181/bin:$PATH
   export PATH=/c/Program\ Files\ \(x86\)/Java/jre1.8.0_181/bin:$PATH
Line 33: Line 32:
   export PATH=/c/Program\ Files/Java/jre1.8.0_181/bin:$PATH
   export PATH=/c/Program\ Files/Java/jre1.8.0_181/bin:$PATH
fi</syntaxhighlight>
fi</syntaxhighlight>
-
:- This will check your Msys2 install's arch (which will be 32 bit if you're on 32 bit) in addition to checking the MINGW platform you are using to determine whether to try to load 32 bit or 64 bit jre.
+
:- This will check your MSYS2 install's arch (which will be 32 bit if you're on 32 bit) in addition to checking the MINGW platform you are using to determine whether to try to load 32 bit or 64 bit jre.
-
 
+
:- '''NOTE:''' Make sure you change the '''Java version''' to the one you have installed; the easiest way to check this is to navigate to C:\Program Files\Java and checking the version.
:- '''NOTE:''' Make sure you change the '''Java version''' to the one you have installed; the easiest way to check this is to navigate to C:\Program Files\Java and checking the version.
-
 
* Once you have LateralGM setup you can simply run it using: <code>java -jar lateralgm.jar</code>.
* Once you have LateralGM setup you can simply run it using: <code>java -jar lateralgm.jar</code>.
:- '''NOTE:''' This method of launching LGM using MSYS2 is recommended over double-clicking the jar because the environment will be configured correctly so that it includes MinGW for ENIGMA to find it.
:- '''NOTE:''' This method of launching LGM using MSYS2 is recommended over double-clicking the jar because the environment will be configured correctly so that it includes MinGW for ENIGMA to find it.
{{DISPLAYTITLE:Windows Installation}}
{{DISPLAYTITLE:Windows Installation}}

Revision as of 05:25, 22 November 2018

The official logo of Windows based operating systems and environments.

Contents

MSYS2

These steps will help you configure an ENIGMA setup using the modern MSYS2 project. This setup better facilitates both 32-bit and 64-bit compilation.

- NOTE: The x86_64 download button will support compilation of both 32-bit and 64-bit games.

Dependencies

- NOTE: You do not need to type the entire command below. Both Command Prompt and MSYS2 have a right-click menu option that allows you to just paste the command from this wiki page.
- NOTE: These packages are for 64 bit, if you want 32 bit then you need to install the same packages but replace :x with :i in the name of each package. Packages that are virtual (e.g, git) need only the colon after their name to install them with Pacboy.
- The Pacboy command you will need to run is:
pacboy -S git: toolchain:x make: boost:x protobuf:x rapidjson:x pugixml:x yaml-cpp:x openal:x dumb:x libvorbis:x libogg:x flac:x mpg123:x libsndfile:x libgme:x sfml:x gtk2:x zlib:x libffi:x box2d:x bullet:x glew:x glm:x alure:x
- Or for 32 bit you'd need to run:
pacboy -S git: toolchain:i make: boost:i protobuf:i rapidjson:i pugixml:i yaml-cpp:i openal:i dumb:i libvorbis:i libogg:i flac:i mpg123:i libsndfile:i libgme:i sfml:i gtk2:i zlib:i libffi:i box2d:i bullet:i glew:i glm:i alure:i
- https://www.microsoft.com/en-us/download/details.aspx?id=35

Get ENIGMA

Configure an IDE

- Once Java is installed you would most likely want to set up your PATH variable in msys2 (this is one of several ways to fix java command not found)
- Edit the file C:\msys64\etc\profile and add the following
if [[ $MSYSTEM = "MINGW32" ]] && [[ $(arch) = "x86_64" ]]; then
  export PATH=/c/Program\ Files\ \(x86\)/Java/jre1.8.0_181/bin:$PATH
else
  export PATH=/c/Program\ Files/Java/jre1.8.0_181/bin:$PATH
fi
- This will check your MSYS2 install's arch (which will be 32 bit if you're on 32 bit) in addition to checking the MINGW platform you are using to determine whether to try to load 32 bit or 64 bit jre.
- NOTE: Make sure you change the Java version to the one you have installed; the easiest way to check this is to navigate to C:\Program Files\Java and checking the version.
- NOTE: This method of launching LGM using MSYS2 is recommended over double-clicking the jar because the environment will be configured correctly so that it includes MinGW for ENIGMA to find it.


Personal tools
Namespaces
Variants
Actions
Navigation
ENIGMA
Other
Toolbox